Search This Blog

Tuesday, October 26, 2010

No Display from AGP video card ?

If you have this problem after install your new AGP video card or shifted from Onboard VGA to a card, you might check following...

If initial on screen display appeares, go to BIOS setup and check AGP aperture size is set to the same or more than your video card memory. (ex. if your card memory is 128MB, AGP aperture size should be set to 128 or more than that).


Even the initial display not comes you must connect video cable to onboard VGA and follow the procedure above.

Good Luck

No comments:

Post a Comment